Model No.: Resin eave drip accessories
Warranty Service: More Than 5 Years
Surface Treatment: Glossy
Color System: Oranges
Across the UK, Germany, and France, thousands of listed buildings suffer from the same problem. Metal drip edges rust within 3-5 years, leaving brown stains on period facades. Condensation from cold metal rots timber fascias. Standard PVC looks industrial and wrong – conservation officers reject it.
The three most common eave failures in Europe:
Rust stains – metal edges corrode, staining Bath stone and Parisian limestone facades
Condensation damage – cold metal causes timber fascia rot – €5,000-10,000 repair per building
Visual rejection – flat PVC profiles fail conservation officer inspection
The solution
SIZE: | Pameter | Specification |
| Material | High-quality ASA Synthetic Resin (Co-extrusion technology) |
| Style | Classic / Antique design |
| Surface & Finish | Glossy, Solid Texture |
Localized Case Study & Data
Client
Heritage Roofing Restoration, a specialty contractor based in Tuscany, Italy.
Client
Heritage Roofing Restoration
Location
Tuscany, Italy (Boutique hotel region – high humidity, freeze-thaw cycles, strict preservation standards)
The Challenge
Restoration of a 15th-century farmhouse converted into an 8-room boutique hotel. The owner demanded authentic terracotta-edged appearance typical of Tuscan architecture. Previous aluminum drip edges failed within 24 months.
Problems before our solution
Corrosion – aluminum edges corroded, causing ugly brown streaks down whitewashed walls
Guest complaints – negative reviews mentioning “run-down appearance” – 5 reviews in 6 months
Visual mismatch – modern aluminum edges looked wrong on 15th-century stone walls
Condensation – cold metal caused moisture on interior wall tops
The owner demanded
Period-correct terracotta appearance
100% corrosion-proof (no brown streaks)
Thermally non-conductive (no condensation)
CE certified for Italian building code
Our Solution
Supplied our Antique-style Resin Eave Drip – custom terracotta/orange colour (RAL 2010 match), Eave Drip Trim for Synthetic Resin Tiles profile, 960mm length – for the entire 400-meter roofline. Paired with ASA Synthetic Resin Tiles. French Longère (Normandy) – Couvreur
Local pain point: Humid coastal climate corrodes aluminum drip edges within 18 months – brown stains on white facades. Guest complaints at boutique hotels.
Product advantage: 100% salt-spray resistant (1,000+ hours ASTM B117) – no rust, no stains. Glossy surface sheds water 40% faster – no pooling, no algae.
Quantitative data: 0% corrosion after 2 coastal winters. 100% guest satisfaction – no facade stains. 64% faster installation than metal.
Key features for European specifiers
100% rust-proof – ASA resin, tested 1,000+ hours salt spray (ASTM B117)
No condensation – thermally non-conductive (λ = 0.16 W/(m·K)) – 400x lower than metal
Period-correct profile – pre-formed antique design, approved by conservation officers in Bath, Berlin, and Bordeaux
-25°C to +80°C – no cracking after 100 freeze-thaw cycles
CE certified – full Declaration of Performance (DoP) for EU building control
FAQ
Q1: What makes this different from metal or standard PVC drip edges?
A: Metal rusts within 3-5 years and causes condensation on timber. Standard PVC fades and cracks under UV. Our Antique-style Resin Eave Drip is 100% rust-proof, thermally non-conductive (400x lower than metal), and UV stable for 10+ years – with period-correct aesthetics approved by conservation officers.
Q2: Will this pass conservation officer inspection in the UK or Germany?
A: Yes. Our Eave Drip Trim for Synthetic Resin Tiles has been approved in Bath (UK), Berlin (DE), and Bordeaux (FR). 9/10 visual authenticity rating with concealed fixings. Full CE DoP included for building control.
Q3: Can you match the exact terracotta color of traditional clay tiles?
A: Yes. We offer custom RAL matching – including classic terracotta (RAL 2010) and antique red (RAL 3009). MOQ: 500 pieces per colour. 5-year fade resistance (ΔE ≤ 5). Send me a photo or RAL code.
Contact Now