Model No.: Tiles Accessory
Use: Exterior Tiles
Surface Treatment: Glossy
Materail:APVC: SIZE:Width 1050mm
Product Information
Across the UK, Germany, and France, contractors know the same frustration. Concrete and clay ridge tiles are heavy, slow to install, and prone to failure. Every project suffers the same three problems.
The numbers behind the pain
Weight – concrete/clay ridges weigh 45-55 kg/m², requiring structural reinforcement on older buildings
Installation – 2-3 hours per meter (cutting, fitting, sealing) – at €70-80/hour labor, costs spiral
Failure rate – 20-40% of concrete ridges crack within 5-7 years, leading to call-backs and leaks
The solution
SIZE:
| Parameter | Specification |
| Material | High-performance APVC Composite (One-piece molding) |
| Dimensions | Width: 1050mm |
| Optimal Ridge Angle | 135 degrees |
Localized Case Study & Data
Client
Bayerische Hochbau GmbH (Bavarian Construction)
Location
Munich, Germany (high labor rates: €75-80/hour, strict building codes)
The Challenge
Contract awarded for 8 public school buildings across Bavaria. Original specification called for concrete ridge tiles. However, multiple problems emerged during bidding.
Concrete ridge tile problems identified
Weight: 52 kg/m² – would require €32,000 structural reinforcement per school (€256,000 total)
Installation: 2-3 hours per meter – 240 labor hours per school at €75/hour = €18,000 labor per school
Water absorption: 10-15% – leads to freeze-thaw cracking within 5-7 years
Shipping: 1 container holds only 200m of concrete ridge – 8 containers needed for 1,600m total
Call-back risk: 20-40% failure rate in first 10 years
The developer demanded:
Weight under 15 kg/m² – no structural reinforcement
Installation under 1 hour per meter – control labor costs
0% water absorption – no freeze-thaw cracking
CE certified – pass German Bauabnahme
15+ year lifespan
Our Solution
Supplied our Main Ridge Tile Synthetic Roof – APVC composite, 135° pre-formed, terra cotta colour (RAL 8003), 6 kg/m² – for all 8 schools. Total ridge length: 1,600 meters.
Bavarian Villa (Germany) – Contractor
Local pain point: Concrete ridge tiles at 52 kg/m² would require €25,000 structural reinforcement for the existing timber frame. German labor at €75/hour makes slow installation unaffordable.
Product advantage: Our Main Ridge Tile Synthetic Roof weighs only 6 kg/m² – 80% lighter – no reinforcement needed. 4x faster installation – 30 min/m vs 2-3 hours for concrete.
Quantitative data: €25,000 reinforcement cost saved. €4,500 labor saved on 300m ridge. 0% water absorption – no freeze-thaw cracking after 2 Bavarian winters.
Key features for European specifiers
80% lighter than concrete – 6 kg/m² vs 45-55 kg/m² – no structural reinforcement needed
4x faster installation – 30 minutes per meter vs 2 hours – saves €4,000-6,000 per project
100% waterproof – 0% water absorption vs concrete 10-15% – no freeze-thaw cracking
CE certified – full Declaration of Performance (DoP) for EU building control
B1 fire rating (DIN 4102-1) – passes German Landesbauordnung
FAQ
Q1: How does cost compare to concrete ridges – upfront and long-term?
A: Upfront, our APVC ridge is comparable to mid-grade concrete. But over 10 years, our Synthetic Roof Tile Fitting Main Ridge costs 50-60% less: 80% lighter (no reinforcement), 4x faster installation, zero maintenance, zero call-backs. Concrete needs re-sealing every 2-3 years and has 20-40% failure rate.
Q2: Is this compatible with my existing concrete tile roof?
A: Yes – if your ridge angle is 135° and purlin spacing is 660mm max. For a perfect fit, we recommend using our ridge with ASA Synthetic Resin Tiles or ASAPVC Composite Roofing Sheets as a complete system. Request our compatibility template.
Q3: Can I private label this product for my local market?
A: Yes. We offer Synthetic Roof Ridge Fitting OEM service – your brand on our product. MOQ: 1,000 pieces. Private label packaging available. Contact me with your logo and branding requirements.
Contact Now